Example
setsysinfo
Description
Synopsis
Input
Example
SSH or Telnet RACADM
racadm getconfig -g <groupname> [-o <objectname>]
[-i <indexnumber>]
racadm <subcommand>
Example
racadm getconfig -g idracinfo
racadm getsysinfo
sshpkauth
Description
88
enabled > — Sets whether the server's host name is used for display
•
<
purposes. Valid values: 0 or 1.
•
Set the name of slot 3 as server3:
racadm setslotname -i 3 server3
•
Enable system to display host names (1=Active):
racadm setslotname -h 1
Sets the name or location of the chassis.
To use this subcommand, you must have the Administrator
privilege.
racadm setsysinfo [-c chassisname|
chassislocation]
<string>
racadm setsysinfo -c chassisname "Dell
Rack System"
The chassis name was set successfully.
Enables you to upload and manage up to four different
SSH public keys per user. You can upload a key file or key
text, view keys, or delete keys.
This command has three mutually exclusive modes—
upload, view, and delete that are determined by the
options.
Upload
The upload mode allows you to upload a keyfile or to copy
the key text on the command line. You cannot upload and
copy a key at the same time.
string > — Indicates a maximum of 64 non-
•
<
extended ASCII chassis name or location.
•
-c — Sets the chassis name or location.