Setslotname - Dell PowerEdge VRTX Reference Manual

Example

setslotname

Description
Synopsis
Input
Sets the name of the slot and enables the feature to display the host name (if available)
of all the four slots, or of a specified slot (indicated by the slot number) in the chassis.
Optionally, use this command to set whether the slot name or host name is displayed in
the CMC Web interface or with the getslotname -i <
name is not available, the static slot name is used.
To use this subcommand, you must have the Administrator privilege.
NOTE: The OMSA server agent must be present and running on the server to use
the Display Hostname feature. If the agent is not running, the setting is ignored. For
more information, see the
support.dell.com/manuals.
racadm setslotname [-i <slotNum> <slotname> | -h 0|1]
racadm setslotname -h <enabled>
slotNum > — Specify the slot number in the chassis. Valid values: 1 to 4.
• <
slotname > — The new name to be assigned to the slot.
• <
timezone > is the case-sensitive name of your
— <
timezone or the index listed by '-z timezone-
prefix*'.
timezone-prefix* > is a prefix of one or more
— <
timezones, followed by '*'.
NOTE: The timezone or daylight savings time is fully
supported for '-l' and '-z' options. Omit the '-l' option
to set the timezone only (eg. '-z US/Central').
• -l — Sets the local date and time in the string
yyymmddhhmmss where:
— yyyy is the year
— mm is the month
— dd is the day
— hh is the hour
— mm is the minute
— ss is the second
— Setting the time using the -l and -z options is
recommended. This command format allows the
CMC to fully support local time zones, including
the ability to automatically adjust the CMC time to
the local Daylight Savings Time.
The setractime subcommand supports dates ranging from
1/1/1970 00:00:00 through 12/31/2030 23:59:59. To set the
local time to October 24, 2007 at 3:02:30 PM:
racadm setractime -l 20071024150230
The time was set successfully.
slot Num > command. If the host
Dell OpenManage Server Administrator User's Guide at
87