Cfgcurrentipv6Dnsserver2; Cfgnettuning; Cfgnettuningnicspeed; Cfgnettuningnicautoneg (Read/Write) - Dell PowerEdge VRTX Reference Manual

Default

cfgCurrentIPv6DNSServer2

Description
Legal Values
Default
Example
racadm getconfig -g cfgCurrentIPv6LanNetworking
# cfgCurrentIPv6Enabled=1
# cfgCurrentIPv6AutoConfigWasUsed=1
# cfgCurrentLinkLocalAddress=fe80::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address1=2009:123::e48f:9dd8:6f51:a669/64
# cfgCurrentIPv6Address2=fd88:1::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address3=fd88:2::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215
# cfgCurrentIPv6DNSServersFromDHCP6=1
# cfgCurrentIPv6DNSServer1=2009:123::1
# cfgCurrentIPv6DNSServer2=::

cfgNetTuning

This group enables users to configure the advanced network interface parameters for the RAC NIC or CMC. When
configured, the updated settings may take up to a minute to become active.
The following sections provide information about the objects in the cfgNetTuning group.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the
properties in this group can result in your RAC NIC become inoperable.

cfgNetTuningNicSpeed

Description
Legal Values
Default

cfgNetTuningNicAutoneg (Read/Write)

Description
Legal Values
Default
152
Displays the IPv6 address for DNS server 2.
None
None
Specifies the speed for the CMC NIC. This property is used
only if cfgNetTuningNicAutoNeg is set to 0.
10, 100, or 1000
100
Enables autonegotiation of physical link speed and duplex.
If enabled, autonegotiation takes priority over other values
set in this group.
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
1