Remoteimage; Serveraction - Dell PowerEdge VRTX Reference Manual

remoteimage

Description
Synopsis
Input
Example

serveraction

Description Enables you to perform power management operations on the host system.
To use this subcommand, you must have the Execute Server Control Commands permission.
Synopsis
racadm serveraction <action>
Input
•
•
•
•
Connects, disconnects, or deploys a media file on a remote server.
To use this subcommand, you must have the Administrator permission.
racadm remoteimage <options>
• -c - Connect the image.
• -d - Disconnect the image.
• -u - Username to access the network share.
• -p - Password to access the network share.
• -l - Image location on the network share; use double quotation marks with a
location.
• -s - Display current status; –a is assumed, if not specified.
•
racadm remoteimage -c -u "user" -p "pass" -l //shrloc/
foo.iso
Remote Image is now Configured
•
racadm remoteimage -d - disconnect
Disable Remote File Started. Please check status using -s option to know Remote
File Share is ENABLED or DISABLED.
•
racadm remoteimage -s - status
Remote File Share is Enabled
UserName
Password
ShareName //10.94.161.112/xxxx/dtk_3.3_73_Linux.iso
module > -
-m <
n =1–4
server-n, where
-a - Performs action on all servers. Not allowed with the powerstatus action.
-f - Force the action. Required for the reseat action.
action >- Specifies the action. The options for the < action > string are:
<
— graceshutdown — Performs a graceful shutdown of the server. If the operating system
on the server cannot be cleanly shutdown, this operation will not be performed.
— hardreset — Performs a reset (reboot) operation on the managed system.
— powercycle — Issues a power-cycle operation on the managed system. This action is
similar to pressing the power button on the system's front panel to turn off, and then turn on
the system.
— powerdown — Turns off the managed system.
81