Cfgserialconsolecolumns; Cfgserialhistorysize (Read/Write); Cfgserialsshenable (Read/Write); Cfgserialtelnetenable (Read/Write) - Dell PowerEdge VRTX Reference Manual
Chassis management controller version 1.0 for dell poweredge vrtx racadm command line reference
Hide thumbs
Also See for PowerEdge VRTX:
- Reference manual (931 pages) ,
- User manual (193 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
cfgSerialConsoleColumns
Description
Legal Values
Default
cfgSerialHistorySize (Read/Write)
Description
Legal Values
Default
cfgSerialSshEnable (Read/Write)
Description
Legal Values
Default
Example
racadm getconfig -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
cfgSerialTelnetEnable (Read/Write)
Description
Legal Values
Specifies the number of columns in the terminal window
command line connected to the serial port. You must log
out, then log in again for the changes to take effect.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with
the line wrap mode ON, if a terminal emulator is used.
0–256
0 (equivalent to 80)
Specifies the maximum size of the serial history buffer.
0 – 8192
8192
Enables or disables the secure shell (SSH) interface on
CMC.
•
1 (TRUE)
•
0 (FALSE)
1
Enables or disables the Telnet console interface on CMC.
•
1 (TRUE)
115
Advertisement
Table of Contents
