Getioinfo; Getled - Dell PowerEdge VRTX Reference Manual

4
idrac System Disabled
Display the current FlexAddress setting for slot 1.
racadm getflexaddr -i 1
Slot-1 server presence = Present
Slot-1 flexaddress enabled = 1
<Fabric>
slot1-A1

getioinfo

Description Displays general information about the I/O modules on the chassis.
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm getioinfo
Example
racadm getioinfo
<IO> <Name>
switch-1 Dell
Ethernet
Passthroug
h

getled

Description
Synopsis
Input
Enabled
<Type>
Gigabit Ethernet
iSCSI
NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel,
and Infiniband.
<Type> <Presence> <POST>
Gigabit Present
Ethernet
Not Present
<Server-Assigned>
00:1C:
23:CD:AC:D2(active)
00:1C:
23:CD:AC:D3(active)
OK
Displays the LED settings on a module: blinking, not
blinking, or unknown (for empty slots).
To use this subcommand, you must have the Login User
privilege.
racadm getled -m <module>
CMC only options:
module > — Specifies the module whose LED settings
-m <
you want to view.
module > can be one of the following:
<
• server-n where n=1–4
• switch-n where n=1
<Chassis-Assigned>
00:1E:C9:FF:E3:21
00:1E:C9:FF:E3:22
<Power> <Role>
ON Master
39