Fanoffset - Dell PowerEdge VRTX Reference Manual

fanoffset

Description
Synopsis
Input
Example
30
• Display eventfilter configurations for a specific severity and subcategory. For
example, a severity of warning in the subcategory licensing under audit
category:
racadm eventfilters get -c cmc.alert.audit.lic.warning
• Clear all available alert settings:
racadm eventfilters set -c cmc.alert.all -n none
• Configure using severity as a parameter. For example, all informational events in
storage category are assigned poweroff as action, and email and snmp as
notifications:
racadm eventfilters set -c cmc.alert.storage.info -n
email,snmp
• Configure using subcategory as a parameter. For example, all configurations
under the licensing subcategory in the audit category are assigned poweroff as
action and all notifications are enabled:
racadm eventfilters set -c cmc.alert.audit.lic -n all
• Configure using subcategory and severity as parameters. For example, all
Information events under the licensing subcategory in the audit category are
assigned poweroff as action and all notifications are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info
-n none
• Configure the event generation interval for temperature statistics:
racadm eventfilters set -c
cmc.alert.system.tmps.warning -r 10
• Configure the event generation interval and notifications for temperature
statistics:
racadm eventfilters set -c cmc.alert.system.tmps -r 5
-n snmp
Configures the internal fans to run at a higher speed than the normal speed.
To use this subcommand, you must have the Chassis Configuration Administrator
privilege.
racadm fanoffset [-s <off|low|medium|high>
Valid category values are:
• off
• low
• medium
• high
s — Sets the fan speed.
• Disable the fanoffset feature.
racadm fanoffset -s off
• Increases fan speed by 20% of fan's maximum speed. Minimum speed for fan is
35% of the maximum.
racadm fanoffset -s low