Cfguseradmin; Cfguseradminindex (Read Only); Cfguseradminprivilege (Read/Write) - Dell PowerEdge VRTX Reference Manual

Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5

cfgUserAdmin

This group provides configuration information about the users who are allowed to access CMC through the available
remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
NOTE: In the current CMC firmware version, the objects cfgUserAdminEnable and
cfgUserAdminPrivilege are interrelated; changing the value of one property causes the value of the other
property to change. For example, if a user does not have login privilege, the user is disabled by default. When you
enable the user by changing the value of UserAdminEnable to 1, the right most digit of the
UserAdminPrivilege also becomes 1. On the other hand, if you change the right-most digit of the
UserAdminPrivilege to 0, the value of UserAdminEnable becomes 0.
Use this object with the config or getconfig subcommands. You must supply an index group number to use these
commands as follows: -i <index group>
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgUserAdmin group.

cfgUserAdminIndex (Read Only)

Description
Legal Values
Default

cfgUserAdminPrivilege (Read/Write)

Description This property specifies the role-based authority privileges allowed for the user. The
value is represented as a bit mask that allows for any combination of privilege values.
The unique index of a user.
The index number is used to specify a unique group name.
Only valid for indexed groups.
The parameter is specified by a decimal integer from 1–16.
index of the instance >
<
109