5-20 Installing the Operating System with Express Setup
Notes on Using the N8103-75 Controller Board
After installing OS, the driver does not installed according to the method of installing OS
occasionally.
In that case, please install the driver by the following procedures.
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as Other device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
– [Adaptec SCSI Card 29320ALP -Ultra320 SCSI ] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.