Standard Features - NEC Express5800/120Rg-1 User Manual

2-18 General Description

STANDARD FEATURES

High performance
Intel Xeon
 
High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(SATA2/Serial Attached SCSI)
High-speed memory access (DDR2-533
or DDR2-667)
High-reliability
Remote Management Controller
Memory monitoring feature (error
correction/error detection)
CPU/memory degradation feature
(logical isolation of a failed device)
Memory chipkill feature
Memory mirroring/online spare memory
feature
Bus parity error detection
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
Redundant power supply (hot-swap)
RoMB (RAID on mother board)
Auto-rebuild feature (hot-swappable)
BIOS password feature
Mechanical security lock
Redundant fans
Management Utilities
NEC ESMPRO
NEC DianaScope
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
Processor
Expandability
One PCI EXPRESS (x8) bus
One PCI-X (64-bit/100 MHz) bus
Large memory of up to 48GB
Hot-swap hard disk drive bays
SATA 3.5": up to 3 hard disk drives
SAS 3.5": up to 3 hard disk drives
SAS 2.5": up to 6 hard disk drives
Up to two multi-processors are available
for upgrade.
One backup file bay
USB2.0 interface (A USB-support driver
is required.)
Many Available Features
Graphic accelerator "ATI RADEON 7000"
support
El Torito Bootable CD-ROM (no
emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-Link feature
Consoleless feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy and Fine Setup
NEC EXPRESSBUILDER (system setup
utility)
Configuration Parameter Diskette Creator
SETUP (BIOS configuration utility)
SoftwareRAID Setup Utility (Onboard
RAID configuration utility)