Using Your Server; Front Bezel - NEC Express5800/120Rg-1 User Manual

2-24 General Description

USING YOUR SERVER

This section describes basic operations of the server including how to use devices such as the
DVD-ROM drive. See Appendix B for notes on using the disc and accessories including the
keyboard and the mouse.

Front Bezel

Remove the front bezel to power on/off the server, to access the DVD-ROM drive and to
install/remove hard disk drives to the 3.5-inch disk bays.
IMPORTANT:
To open the front door, you must unlock the door with the provided
security key.
Pay attention not to press the POWER switch when you install or
remove the front bezel.
Installing or Removing the Front Bezel
When turning the power of the server on/off, accessing to the DVD-ROM drive, or installing or
removing a hard disk drive on or from the 3.5-inch disk bay, first remove the front bezel.
IMPORTANT:
it by using the attached security key.
1.
Insert the attached security key into the key slot and turn the key to the front bezel side
with it pressed lightly to release the lock.
2.
Hold the right end of the front bezel lightly to pull it toward you.
The front bezel can be opened only when you unlock
Unlock Lock