NEC Express5800/120Rg-1 User Manual page 243

IMPORTANT:
Do not push on the handle until the handle begins to close by itself.
Carefully hold the hard disk drive with both hands.
Do not press the POWER switch during the installation or removal
of the hard disk drive if your server is running.
NOTE:
Confirm that the handle is hooked to the frame when having
inserted the hard disk drive.
7.
When the handle begins to close by itself , slowly close the handle.
The drive carrier is locked when a "click" is heard.
IMPORTANT:
Be careful not to get your finger caught between the handle and tray.
Push the drive further to check if it is firmly secured.
8.
Install the front bezel you removed in step 2.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame,
install the front bezel, and lock it with the security key.
Upgrading Your Server 9-13