NEC Express5800/120Rg-1 User Manual page 83

4.
Loosen the two captive thumbscrews.
5.
Hold the handle and pull out the server from the rack slowly and carefully.
The server clicks to be latched.
6.
Pull out the server from the rack with the right and left release lever pressed to release the
latch.
IMPORTANT:
Pull out the server slowly holding the bottom of the server by at
least two persons.
Do not apply any load on the server pulled out from the rack. Doing
so may cause personal injury if the server drops.
To remove some mechanical parts of the rack, see the installation procedure.
Release lever
Captive thumbscrews
Handles
Setting Up Your Server 3-15