NEC Express5800/120Rg-1 User Manual page 142

5-12 Installing the Operating System with Express Setup
NOTE: If you press the F9 key in [Role of Computer], the installation
will be done using the default values of Express Setup for the settings
afterwards automatically.
(Only when the [OK] button is displayed in the right side of the
screen).
11.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to
mass storage driver into the floppy disk drive and follow the message to operate the
installation.
NOTE: You can use this function only when the floppy disk drive is
attached to the system.
12.
Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive according
to the message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the DVD-ROM drive.
[Agree Software License Agreement] screen appears.
13.
Read the agreement carefully and click [I agree.] or press F8 if you do agree. If you do
not agree, click [I disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the appropriate
value.