Table of Contents
Advertisement
<Reinstallation of graphics accelerator driver>
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" which is in the following directory.
To install a standard graphics accelerator driver:
<DVD-ROM Drive Letter>:\WINNT\DOTNET\VIDEO\MATROX\SETUP.EXE.
To install a graphics accelerator (N8105-45) driver:
<DVD-ROM Drive Letter>:\WINNT\DOTNET\VIDEO\ES1000\SETUP.EXE.
NOTE:
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive, and restart
the system.
End of installation.
SCSI Controller Driver (N8103-75/95/N8190-126)
If you utilize SCSI controller driver (N8103-75/95/N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Please choose one of above to be installed.
Installing Windows Server 2003 E-17
Advertisement
Table of Contents
Troubleshooting
