NEC Express5800/120Rg-1 User Manual page 87

Setting Up Your Server 3-19
To connect the power cord from the server to an uninterruptive power supply (UPS), use service
outlets on the rear of the UPS. Refer to the manual that comes with the UPS.
When the power cord from the server to a UPS, change the BIOS setup of the server to link with
power supply from the UPS.
To power on the server from the UPS (Uninterruptible Power Supply), select [Server] - [AC-LINK]
- [Power On].
Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See Chapter
4 for details.