Installing Windows Server 2003 X64 Editions; Creating "Windows Server 2003 X64 Edition Oem-Disk For Nec Expressbuilder - NEC Express5800/120Rg-1 User Manual

INSTALLING WINDOWS SERVER 2003 X64 EDITIONS

Preparations for Installation
NEC EXPRESSBUILDER CD-ROM
Microsoft Windows Server 2003 R2 Standard x64 Edition (CD-ROM) / Microsoft
Windows Server 2003 R2 Enterprise x64 Edition (CD-ROM)
User's Guide
Getting Started
Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER diskette
Creating "Windows Server 2003 x64 Edition OEM-DISK for
NEC EXPRESSBUILDER"
Before installing, create Windows Server 2003 x64 Edition OEM-DISK for NEC
EXPRESSBUILDER diskette.
NOTE:
OEM-DISK for NEC EXPRESSBUILDER" for NEC Express5800
Server which you are going to install Windows Server 2003 x64 Edition,
you do not need to create it again.
You can create Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER with
the following two procedures.
Create from the menu which appears when running NEC Express5800 Server with NEC
EXPRESSBUILDER.
If you have only NEC Express5800 Server to create Windows Server 2003 x64 Edition
OEM-DISK for NEC EXPRESSBUILDER, use this procedure.
If Windows Server 2003 can be operated on NEC Express5800 Server, you can use the
other procedure described later.
Follow the steps below.
1.
Prepare one 3.5-inch floppy disk.
2.
Turn on your NEC Express5800 Server.
3.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.
4.
Press Ctrl + Alt + Delete to reboot the server .(You may also turn off and then on again
to reboot the server.)
The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.
5.
Select [Create Support Disk] from [Tools].
6.
Select [Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER]
from [Create Support Disk] menu.
If you have already "Windows Server 2003 x64 Edition
Installing Windows Server 2003 x64 Editions D-5