Rear Panel; Remote Control Unit - THOMSON THS810 User Manual

2.3RearPanel
1. iR
2. oPTicALs/PDif
3. sATin
4. sAToUT
5. TvscART
6. Usb
7. hDMi
8. Powerswitch
9. DcPoWeR
2.4RemotecontrolUnit
1. fAv
2. q
3. Tv/R
4. 0~9
5. PG-/PG+
6. bAck
7.
8.
pq
9.
tu
10. ok
11. MenU
12. eXiT/soRTie
13. GUiDe
14. v+/v-
15. !
16. P+/P-
17. sUb
18. TXT
19. AUDio
20. LisT
21. oPT
22.
23. :"
24. 5/6
25. 4
26.
u
27. 2
28. 3
29. ReD
P4
YoURReceiveR
To connect the IR extender
To connect to a digital amplifier or home theatre
To connect to the LNB of your satellite antenna for reception of
satellite broadcast signal
To loop through the satellite signal to a second receiver
To connect to your TV set using a SCART cable
To connect your USB storage device
To connect to the HDMI input of your TV set using a good quality
HDMI cable
To power switch ON or OFF your receiver
To connect to the original included main power adapter (Input
110 – 240 V 50~60 Hz/ Output 12 V DC )
Opens the favourite group selection
Turns the receiver On/Standby
Toggles between TV and RADIO mode
Channel selection or value input
Scroll page wise in all lists
Switches between the two last watched channels
Shows the actual channel information (2x technical info)
Menu Off: Change channel to previous/next. Menu On: Moves the
cursor up/down.
Menu Off: Increases/decreases the volume level. Menu On:
Change settings for specific Menus and for navigation
Menu Off: Displays the current channel list. Menu On: Opens the
highlighted setting
Opens the main menu and from main menu you will get one step back
Exits from the menu, sub-menu or cancels actions
Shows the EPG (Electronic Programme Guide) in TV mode
Increases/decreases the volume in all modes incl. videotext
Mutes audio output of the receiver in every mode incl. videotext
Programme +/-
Shows the list of subtitle languages if available, in videotext opens
the sub-page function*
Opens the Teletext if available*
Opens the list of audio languages
Shows the satellite selection in viewing mode
Opens the settings for TV format, aspect ratio and resolution
In viewing mode changes the resolution
During playback mode jumps to the previous or next recording
Fast rewind/Fast forward
Starts recording the current broadcast, once more pressing opens
the recording time to enter
Opens the HDD Manager in viewing mode. In HDD Manager starts
playback of the selected file.
To start Timeshift in viewing mode
Stops the current recording, Time shift or playback of the selected file
In menu for specific functions.
Fig. 2
Fig. 3