Your Receiver; Default Pin: 0000; Front Panel; Rear Panel - THOMSON THT741 User Manual

2.0 Your rEcEIvEr

2.1 dEFAuLt PIn: 0000

2.2 Front Panel

1.
iR Sensor
2.
LED Display
3.
Mode indicatorLED
4.
q
5.
USB

2.3 rear Panel

1.
ANT iN
2.
ETHERNET
3.
HDMi
4.
S/PDiF coaxial
5.
TV ScART
6.
Power cord
7.
Power switch

2.4 remote control

1.
q
2.
!
3.
FAV
4.
LiST
5.
AUDiO
6.
9
7.
cOLOUR BUTTONS
8.
Receives commands from the remote control
Shows channel number and time in standby
RED indicates that the receiver is in STANDBY mode. GREEN
indicates that the receiver is in OPERATING mode.
Switches the receiver ON or into Standby
To connect your USB storage device.
To connect to your antenna for reception of broadcast
signals.
To connect to your Ethernet cable (RJ-45) for RSS feeds and
weather forecasts
To connect your receiver with your TV-set using an HDMI
cable.
To connect your receiver to a digital home cinema set, AV
receiver or digital audio amplifier.
To connect your receiver with your TV-set using a SCART
cable.
Your receiver requires a supply voltage of 220 – 240 V AC
(Auto-selectable), 50/60Hz +/-5%. Please ensure the local
power specification meets these requirements before
connecting your receiver to the wall outlet.
To power your receiver ON or OFF
Switches the receiver On/Standby.
Quick press: passive standby – enables quick start-up. Long
press (more than one second): active standby - longer
start-up time
Mutes all audio outputs of the receiver
Opens the favourite group selection.
Call the current channel list.
Opens the audio* language selection
One step back in menu or back to previous channel.
In different menus for specific functions
Opens the current channel information; 2x opens the current
event information and 3x the next event information.*
Fig. 1
Fig. 2
Fig. 3
5