Table of Contents
Advertisement
Please ensure that either the USB device is already formatted to FAT32.
y
y
2.0YoURRECEIvER
2.1DefaultPIn-code
Default PIN-code of receiver is "0000". This one can be modified later on.
2.2mastermRPIn-code
This PIN is used for maturity rating and playback of protected records and is supplied by the
operator.
2.3frontPanel
The front flap can be opened at the top for inserting the smart card
1. standby/onbutton
2. P-/P+buttons
3. v-/v+buttons
4. IRsensor
5. WhitelEDDisplay
6. RedIndicationlED
7. smartcardslot
5 min after switching the receiver to standby it enters the deep sleep mode. Within this time
noTE:
the receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
2.4RearPanel
1. IR
2. oPTICals/PDIf
3. saTIn
4. saToUT
5. TvsCaRT
6. Usb
7. hDmI
8. Powerswitch
9. DCPoWER
2.5RemoteControl
1. fav
2. q
3. Tv/R
4. 0~9
5. Pg-/Pg+
6. baCk
7.
8.
pq
9.
tu
P4
YoURRECEIvER
Turns the receiver ON or into Standby
Switches to the previous/next programme
Reduces or increases the volume level
Receives the RCU commands
Displays channel number and time
Indicates that receiver is currently in power saving mode
To insert your Irdeto Smart card with the chip downwards
To connect the optional infrared sensor
To connect to a digital amplifier or home theatre
To connect to the LNB of your satellite antenna for reception of
satellite broadcast signal
To loop through the satellite signal to a second receiver
To connect to your TV set using a SCART cable
To connect your USB device
To connect to the HDMI input of your TV set using a good quality
HDMI cable
To switch ON or OFF power of your receiver
To connect to the original included main power adapter
(Input 110 ~240V 50~60Hz/ Output DC 12 V/2A
Opens the favourite group selection
Turns the receiver On/Standby
Toggles between TV and RADIO mode
Channel selection or value input
Scroll page wise in all lists
Switches between the two last watched channels
Shows the actual channel information (2x technical info)
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus and for navigation
Fig.1
Fig. 2
Fig. 3.
Advertisement
Table of Contents
