Power Connection; Access To The Machine - Ricoh DSm651 Operating Instructions Manual

Remarks
• Close all covers and trays in-
cluding the front cover and by-
pass tray.
Limitation
❒ Carefully move the machine. If
you do not, the machine might be
damaged or a stored file might be
deleted.
❒ Avoid any strong shock to the ma-
chine. This could damage the hard
disk and cause stored files to be de-
leted. For precautionary reasons,
files should be copied to another
local computer.

Power Connection

R WARNING:
• Connect the machine only to
6
the power source described
on the inside front cover of
this manual. Connect the pow-
er cord directly into a wall out-
let and do not use an
extension cord.
• Do not damage, break or make
any modifications to the pow-
er cord. Do not place heavy
objects on it. Do not pull it
hard nor bend it more than
necessary. These actions
could cause an electric shock
or fire.
R CAUTION:
• Unplug the power cord from the
wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
R CAUTION:
• When you disconnect the power
plug from the wall outlet, always
pull the plug (not the cable).
130
• When the main power switch is in
the stand-by position, the optional
anti-condensation heaters are on.
In case of emergency, unplug the
machine's power cord.
• When you unplug the power cord,
the anti-condensation heaters turn
off.
• Make sure that the plug is firmly
inserted in the outlet.
• Voltage must not fluctuate more
than 10%.
• The socket-outlet should be in-
stalled near the equipment and
should be easily accessible.

Access to the Machine

Place the machine near the power
s o u rc e , p ro vi d i n g c le a r an c e a s
shown.
1.
Rear: more than 5 cm (2")
2.
Right: more than 4 cm (1.6")
3.
Front: more than 70 cm (27.5")
4.
Left: more than 5 cm (2")
Note
❒ For required space when options
are installed, contact your service
representative.