Loading Paper In Tray 1 - Xerox DocuPrint C1190 FS User Manual

Loading Paper in Tray 1

Use Tray 1 for a wide range of media including:
Plain paper
■
Thin card stock
■
Thick card stock
■
Glossy paper
■
Thick Glossy paper
■
Labels
■
See also:
Printing on Specialty Media
Loading Paper in Tray 1
This section describes how to load paper in Tray 1.
Important: Do not remove the tray during printing. It may cause a paper jam.
1.
Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and
remove it from the printer.
2.
Slide the width guides to the edge of the tray. The width guides should be fully extended.
Note:
When loading paper that is 210 mm (A4) wide, such as Letter-size or Legal-size paper, set the
tab on the side of the tray to the (A4) position.
on page 5-24
5-11
Loading Paper