Table of Contents
Advertisement
Selecting a Tray to Use for Copies
In some cases, you may want to make copies on letterhead or colored paper. After loading the special paper
in a tray, select the tray to use for your copies.
To select the tray for copying special paper:
1.
On the printer console, press the Copy button.
2.
Select Paper Supply, and then press the OK button.
3.
Select one of the following trays to use for the copies, and then press the OK button.
Tray 1
■
Manual Feeder
■
Note:
For best results, specify the size and type of paper if using Tray 1.
Selecting the Document Type
The scanner optimizes the appearance of the output based on the contents of the original. To set the
original type:
1.
On the printer console, press the Copy button.
2.
Select Document Type, and then press the OK button.
3.
Select the original type, and then press the OK button.
Text: For black and white or colored text.
■
Mixed (factory default): For both text and photographs, such as magazines or newspapers.
■
Photo: For photograph prints.
■
Selecting the Default Copy Settings
To set the default copy settings:
1.
On the printer console, press the System button.
2.
Select Defaults Settings, and then press the OK button.
3.
Select Copy Defaults, and then press the OK button.
4.
Press the Down Arrow button until the desired option appears, and then press the OK button.
5.
Select the desired setting, and then press the OK button.
6.
Repeat steps 4 and 5 as needed.
7.
Press the Exit button.
6-4
Adjusting Copying Options
Advertisement
Table of Contents
