Xerox DocuPrint C1190 FS User Manual: Electrical Safety

Xerox printers user guide.
Hide thumbs

Advertisement

Electrical Safety

This product shall be operated by the power source as indicated on the product's data plate. Consult your
local power company to check if your power source meets the requirements.
WARNING: Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug fits only into an earthed
electrical outlet. This is a safety feature. If the plug doesn't fit to the outlet, contact an electrician to
replace the outlet to avoid risk of electric shock. Never use an earthed adapter plug to connect the
product to the electrical outlet that has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.
This product shall be operated by the electrical supply as indicated on the product's data plate label.
Consult your local power company to check if your electrical supply meets the requirements.
WARNING: Connect this product to a protective earth circuit
Improper connection of a grounding conductor may cause electric shock.
Plug the power cord directly into a grounded electrical outlet. To prevent overheat and a fire accident,
do not use an extension cord, a multi-plug adaptor or a multiple connector. Consult your local Fuji
Xerox representative to check if an outlet is grounded.
Connect this product to a branch circuit or an outlet that has larger capacity than the rated ampere and
voltage of this product. See the data plate on the rear panel of this product for its rated ampere and
voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Do not place an object on the power cord.
Always keep the plug connection free of dust. The dusty and damp environment may bring about
minute electric current in a connector. It may generate heat and eventually cause a fire accident.
To avoid the risk of electric shock and a fire accident, only use the power cord supplied with this
product or the ones designated by Fuji Xerox.
The power cord is exclusive use for this product. Do not use it for any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat and eventually
cause electric shock or a fire accident.
If the power cord is damaged or insulated wires are exposed, contact your local Fuji Xerox
representative for its replacement. Do not use a damaged or uninsulated cord to avoid the risk of
electric shock and a fire accident.
1-3
Safety Notes

Advertisement

This manual also for:

Docuprint c1190 fs

Comments to this Manuals

Symbols: 0
Latest comments: