Motorola Netopia Embedded Software Handbook page 170

5-28 Administrator's Handbook
Enabled:
Forward:
Call Placement/Idle Reset:
Force Routing:
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
TOS:
TOS Mask:
Protocol Type:
Source Port Compare...
Source Port ID:
Dest. Port Compare...
Dest. Port ID:
Established TCP Conns. Only:
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
Select Input Filter 2 and press Return. In the Change Input Filter 2 screen, set the Protocol Type to allow GRE as
shown below.
Enabled:
Forward:
Call Placement/Idle Reset:
Force Routing:
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
TOS:
TOS Mask:
Protocol Type:
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
Change Input Filter 1
Yes
Yes
No Change
No
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0
0
TCP
No Compare
0
Equal
1723
No
Change Input Filter 2
Yes
Yes
No Change
No
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0
0
GRE