Ip Setup Screen; Backup Management/Statistics - Motorola Netopia Embedded Software Handbook

8-16 Administrator's Handbook
the system to wait before attempting to switch back to the WAN connection. This allows you to be sure
that the WAN connection is well re-established before the gateway switches back to it from the backup
mode.
•
Press Escape twice to return to the Main Menu.

IP Setup screen

To configure the backup gateway, from the Main Menu select System Configuration then IP Setup.
The IP Setup screen appears.
The IP Setup screen permits entry of a backup IP gateway address. This field is always visible, even if the
Default IP Gateway field is not filled out, as in the case of a DHCP-acquired IP address and default gateway on
the WAN interface.
Ethernet IP Address:
Ethernet Subnet Mask:
Define Additional Subnets...
Default IP Gateway:
Backup IP Gateway:
Primary Domain Name Server:
Secondary Domain Name Server:
Domain Name:
Receive RIP...
Transmit RIP...
Static Routes...
Network Address Translation (NAT)...
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP attributes of your Netopia in this screen.
For more information on IP Setup see the
Note:
Backup and Recovery have resolutions of five seconds. This is how often the gateway evaluates the
state of the connections and makes decisions.

Backup Management/Statistics

If backup is enabled, the Statistics & Logs menu offers a Backup Management/Statistics option.
System
Main
Menu
Configuration
"IP Setup" on page
IP Setup
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Both
Off
IP Address Serving...
7-1.
IP
Setup