Working With Ip Filters And Filter Sets; Adding A Filter Set - Motorola Netopia Embedded Software Handbook

It is strongly recommended that you take the latter, and safer, approach to all of your filter set designs.

Working with IP Filters and Filter Sets

This section covers IP filters and filter sets.
To work with filters and filter sets, begin by accessing the filter set screens.
Note:
Make sure you understand how filters work before attempting to use them. Read the section
Filters and Filter Sets," beginning on page
The procedure for creating and maintaining filter sets is as follows:
1. Add a new filter set.
2. Create the filters for the new filter set.
3. View, change, or delete individual filters and filter sets.
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set can contain up to 16 output filters and up
to 16 input filters.
Main
Menu
Configuration
10-20.
Filter Sets
Add Filter Set...
Display/Change Filter Set...
Delete Filter Set...
System
Security 10-27
Filter
Sets
"About