Motorola Netopia Embedded Software Handbook page 43

WAN Link Failure Detection:
Ping Enable:
Return/Enter accepts * Tab toggles * ESC cancels.
Toggle Ping Enable to On and press Return. The Ping settings options appear.
WAN Link Failure Detection:
Ping Enable:
Ping Host Name or IP Address #1:
Ping Host Name or IP Address #2:
Delay (s):
Ping failures:
•
The Ping Host Name or IP Address #1 and Ping Host Name or IP Address #2 fields allow you to enter the
fully-qualified host name(s) or IP address(es) in standard dotted-quad format of the hosts you want to Ping
for connection validation. If no ICMP echo(es) are returned from these hosts, the connection is assumed to
be lost, and the Virtual Router will relinquish Master status.
•
The Delay (s) field allows you to specify the time in seconds between Pings. The default is five (5) seconds.
•
The Ping failures field allows you to specify the number of Ping time-outs or failures after which the
connection is assumed to be lost. The default is ten (10).
VRRP Options
Off
VRRP Options
On
5
10
WAN Configuration 2-27