System Configuration Features - Motorola Netopia Embedded Software Handbook

Chapter 3
System Configuration
This chapter describes how to use the Telnet-based management screens to access and configure advanced
features of your equipment. You can customize these features for your individual setup. These menus provide a
powerful method for experienced users to set up their Router's system configuration.
System Configuration Features
®
The Motorola Netopia
require advanced settings or prefer manual control over the default selections. For these users, Motorola
Netopia® Embedded Software Version 8.7.4 provides many advanced system configuration options.
This section covers the following topics:
•
"IP Setup" on page 3-2
•
"Filter Sets" on page 3-2
•
"IP Address Serving" on page 3-2
•
"Network Address Translation (NAT)" on
page 3-2
•
"Stateful Inspection" on page 3-3
•
"Procedure for Default Installation for ICSA
firewall certification of Small/Medium
Business Category Module (ADSL Routers)"
on page 3-60
•
"VLAN Configuration" on page 3-11
•
"Date and time" on page 3-37
To access the system configuration screens, select System Configuration in the Main Menu and press Return.
The System Configuration menu screen appears:
Router's default settings may be all you need to configure. Some users, however,
•
"Wireless configuration" on page 3-38
•
"Console Configuration" on page 3-49
•
"SNMP (Simple Network Management Protocol)"
on page 3-50
•
"Security" on page 3-50
•
"Upgrade Feature Set" on page 3-50
•
"Router/Bridge Set" on page 3-51
•
"IGMP (Internet Group Management Protocol)"
on page 3-52
•
"Logging" on page 3-55
System Configuration 3-1