Table of Contents
Advertisement
10-30 Administrator's Handbook
Filter Set Name:
Note:
There are two groups of items in this screen, one for input filters and one for output filters. In this
section, you'll learn how to add an input filter to a filter set. Adding an output filter works exactly the same way,
providing you keep the different source and destination perspectives in mind.
1.
To add a filter, select Add Input Filter to Filter Set and press Return. The Add Input Filter screen appears.
Enabled:
Forward:
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
Protocol Type:
Protocol Type:
Source Port Compare...
Source Port ID:
Dest. Port Compare...
Dest. Port ID:
Established TCP Conns. Only:
ADD THIS FILTER NOW
2.
To make the filter active in the filter set, select Enabled and toggle it to Yes. If Enabled is toggled to No, the
filter can still exist in the filter set, but it will have no effect.
Display/Change Filter Set...
Add Input Filter to Filter Set...
Display/Change Input Filter...
Delete Input Filter...
Move Input Filter...
Add Output Filter to Filter Set...
Display/Change Output Filter...
Delete Output Filter...
Move Output Filter...
Add Input Filter
Filter Set
3
Yes
No
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
ANY
TCP
No Compare
0
No Compare
0
No
CANCEL
Advertisement
Table of Contents
