2-6 Administrator's Handbook
Show/Change
Add
Delete
8.
To add a circuit, select Add Circuit and press Return. The Add Circuit screen appears.
Circuit Name:
Circuit Enabled:
Circuit VPI (0-255):
Circuit VCI (32-65535):
QoS...
Peak Cell Rate (0 = line rate):
Use Connection Profile...
Use Default Profile for Circuit
ADD Circuit NOW
•
Enter a name for the circuit in the Circuit Name field.
•
Toggle Circuit Enabled to Yes.
•
Enter the Virtual Path Identifier and the Virtual Channel Identifier in the Circuit VPI and Circuit VCI
fields, respectively.
•
The Peak Cell Rate field is editable. Motorola Netopia® Embedded Software Version 8.7.4 supports
three ATM classes of service for data connections: Unspecified Bit Rate (UBR), Constant Bit Rate
(CBR), and Variable Bit Rate (VBR). You can configure these classes of service on a per VC basis. The
ATM Circuits Configuration
Circuit...
Circuit...
Circuit...
Add Circuit
Circuit 2
Yes
0
+-------------+
+-------------+
| UBR
| CBR
| VBR
+-------------+
Default Profile
CANCEL
|
|
|