Nat Associations - Motorola Netopia Embedded Software Handbook

Address Trans| <<None>>
NAT Map List.|
NAT Server Li|
Filter Set (F|
Remove Filter|
Rip Options: |
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
•
Select the server list you want to bind to the default profile and press Return. The server list you selected
will now be bound to the default profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields' visibility are dependent only on the IP Addressing type.

NAT Associations

Configuration of map and server lists alone is not sufficient to enable NAT for a WAN connection because map
and server lists must be linked to a profile that controls the WAN interface. This can be a Connection Profile, a
WAN Ethernet interface, a default profile, or a default answer profile. Once you have configured your map and
server lists, you may want to reassign them to different interface-controlling profiles, for example, Connection
Profiles. To permit easy access to this IP Setup functionality, you can use the NAT Associations screen.
You access the NAT Associations screen from the Network Address Translation screen.
Select NAT Associations and press Return. The NAT Associations screen appears.
IP Parameters (Default Profile)
+-NAT Server List Name-+
+----------------------+
| Easy-Servers
| my_servers
|
|
|
|
|
|
|
|
+----------------------+
Main
Menu
Configuration
|
|
|s
|
|_first_map
|
|
|
|
|
|th
|
|
|
|
|
System
Network Address
Translation (NAT)
Multi-NAT 4-25