Enable Privacy - Motorola Netopia Embedded Software Handbook

Enable Wireless:
SSID:
Block Wireless Bridging:
Channel...
AutoChannel...
Closed System...
Wireless Multimedia (WMM)...

Enable Privacy...

Wireless Multiple SSID Setup...
MAC Address Authentication...
To enable the Wireless Multimedia custom settings, select diffserv from the pull-down menu.
Enable Privacy
By default, Enable Privacy is set to Off. IT IS STRONGLY RECOMMENDED THAT YOU ENABLE PRIVACY.
•
WPA-PSK: (Wi-Fi Protected Access) The easiest way to enable Privacy on your Wireless network is by
selecting WPA-PSK - (Pre-Shared Key) from the pop-up menu.
Enable Wireless:
SSID:
Block Wireless Bridging:
Channel...
AutoChannel...
Closed System...
Enable Privacy...
Wireless Multiple SSID Setup...
MAC Address Authentication...
The Pre Shared Key field becomes visible to allow you to enter a Pre Shared Key. The key can be between
8 and 63 characters, but for best security it should be at least 20 characters. Clients wishing to connect
must also be configured to use WPA with this same key.
Wireless LAN Configuration
Yes
0271 1000
No
6
+------------+
+------------+
| Off
| diffserv
+------------+
Wireless LAN Configuration
Yes
0271 1000
No
+---------------------------+
+---------------------------+
| Off
| WEP - Manual
| WEP - Automatic
| WPA - PSK (Pre-Shared Key)|
| WPA - 802.1x
+---------------------------+
System Configuration 3-41
|
|
|
|
|
|