Adding A Radius Profile - Motorola Netopia Embedded Software Handbook

3-18 Administrator's Handbook
Adding a RADIUS Profile
•
Authentication Profile – If you toggle 802.1x to Yes, this option displays. Select Authentication Profile and
press Return.
If you have RADIUS server profiles already defined, the pop-up menu allows you to select one for use with
this VLAN. If none are defined, the pop-up menu offers the option to configure a RADIUS Profile.
Caution!If you enable 802.1x for a VLAN that includes a wireless SSID, you must access the Wireless LAN
Configuration menu and set Enable Privacy to WPA-802.1x as well. See
multiple SSIDs are split across several VLANs, the VLANs must either:
• all have 802.1x enabled with WPA-802.1x enabled in Wireless Privacy, or
• have the VLANs set to 802.1x disabled and Wireless Privacy set to some other privacy setting. In that case
Wireless Privacy can be any setting. Wireless does not currently support separate privacy modes per SSID.
When enabling WPA-802.1x, wireless will default to the RADIUS configuration specified in Advanced Security
Options (see "Advanced Security Options" on page
will use the VLAN authentication profile's specified RADIUS server.
VLAN ID (1-4094):
VLAN Type...
VLAN Name:
VLAN Network:
802.1x:
Authentication Profile...
Once a VLAN has been successfully|
"Add Port Interface" option of th|
ADD VLAN
Select Add RADIUS Profile and press Return.
The Add Server Profile screen appears.
10-5), unless it is part of a VLAN. If it is part of a VLAN it
Add VLAN...
10
global
Network A
Primary LAN
+----------Profile Name-----------+
+---------------------------------+
| <Add RADIUS Profile>
|
+---------------------------------+
CANCEL
"Enable Privacy" on page
|
|
|
|
3-41. If