Using Scheduled Connections With Backup - Motorola Netopia Embedded Software Handbook

8-12 Administrator's Handbook
When you are finished, press Escape.

Using Scheduled Connections with Backup

The backup link is a PPP dial-up connection and only connects to the Internet service provider when traffic is
initiated from the LAN. If you want to use the backup link to provide redundancy for services, such as a Web
service that you provide to the outside world, you must force the connection to stay up. You do this by creating
a scheduled connection entry that will be a permanent "forced up" connection for the backup modem. The
backup modem will be activated upon primary WAN link failure and remain active until primary WAN link
recovery.
To configure a Scheduled Connection, from the Main Menu select WAN Configuration and then Scheduled
Connections.
Main
Menu
The Scheduled Connections screen appears.
Return/Enter to add a Scheduled Connection.
Navigate from here to add/modify/change/delete Scheduled Connections.
•
Select Add Scheduled Connection and press Return. The Add Scheduled Connection screen appears.
WAN Advanced Connection
Configuration
Scheduled Connections
Display/Change Scheduled Connection...
Add Scheduled Connection...
Delete Scheduled Connection...
Options
Scheduled
Connections