Changing The Units Of Measure - Standard Horizon MAGNUM NAV-40 Owner's Manual

Basic Operation
C U
HANGING THE NITS OF
M
EASURE
42
The units of measure may be changed, between three selections: "Statute," "Met-
ric," and "Nautical."
1. Press the [ MENU ] key, then highlight "SETUP" selection; click on this se-
lection.
2. Highlight the "GENERAL" selection, and click on it.
3. Highlight the "UNITS" field, and click on it.
4. The selection box below will expand, and you may now highlight the units of
measure you prefer. Click on your preferred selection.
5. Highlight the "EXIT" selection, and click on it. You will now be returned to
the screen you previously were using.
Congratulations! You have now mastered the basics of navigation using the
MAGNUM!