Menu System Contents - Standard Horizon MAGNUM NAV-40 Owner's Manual

Menu System
The Menu system of the MAGNUM is used for many start-up, configuration, and
Contents
customization purposes. Each option on the main Menu screen may have several
different parameters involved in its utilization; for now, we'll just discuss the
M
ENU
main points of each Menu option, and details will follow in later chapters.
GOTO ( "Go To" )
While using the MAGNUM, you will probably store Waypoints or Marks during
a journey. You may use the "GOTO" Menu selection to select a Mark, Waypoint,
or "POI" (Point of Interest) and then GOTO that destination. You may also enter
the Latitude and Longitude of a new Destination, and then GOTO that location.
Waypoints and Marks may have their contents edited by clicking on the "EDIT"
option after you have selected the Waypoint, in case you wish to modify any
aspect of the stored data.
MARK
The "MARK" option allows you to enter a new Mark, Edit an existing Mark, or
Delete existing Marks.
NEW TRACK
When starting a new journey, you'll want to begin with a fresh starting point. To
do this, use the Joystick to select "NEW TRACK," then click on "YES" when the
"CONTINUE?" pop-up window appears. A new message ("PLEASE WAIT. . .")
will appear, and after a few seconds you will be returned to the Track page.
20