Using The Highway Page - Standard Horizon MAGNUM NAV-40 Owner's Manual

Basic Operation
U
SING THE
HIGHWAY P
AGE
52
The Highway page creates a "3D highway" that shows the most relevant naviga-
tion information. Basically, it is a view similar to that experienced when driving
on a highway to a destination. If you are navigating or a route with Waypoints
stored, the Highway page will show the turns necessary to follow all the Waypoints
to the final destination.
The highway's width ("CDI" or Course Deviation Indication) can be set up so the
width of the highway is 0.2, 0.5, 1.0, or 2.0 miles. Press the [ MENU ] key,
highlight SETUP, and Click on SETUP. Now highlight HIGHWAY and click on it.
Highlight CDI, choose the desired highway width, and click on the desired width.
Use of the Highway page requires that you enter a destination.
There are four data fields at the top of the Highway page. These fields may be
customized, as on the other pages. To do this:
1. Press the [ MENU ] key, then use the Joystick to select SETUP. Click on
SETUP.
2. Select SELECT FIELDS and click on that selection, then select HIGHWAY
PAGE and click on it.
3. The available display fields are now displayed, and you may modify the avail-
able selections to suit your preferences, remembering that a maximum of
four fields may be displayed on the Highway page.
4. Click on EXIT when you are done.