Setting Up The Alarms - Standard Horizon MAGNUM NAV-40 Owner's Manual

Advanced Operation
S U A
ETTING P THE LARMS
76
S U A
ETTING P THE LARMS
Several Alarms are available, to alert you to conditions of interest. These include:
¦ Destination Alarm: Is engaged when you near your destination.
¦ Anchor Alarm:
¦ GPS Fix Alarm:
These Alarms can all be configured at the same time:
Destination Alarm
r Press the [ MENU ] key, then highlight to the "SETUP" selection; click on this
selection.
r Highlight the "DSTN ALARM" selection, and click on it.
r Highlight the "APPROACH ALARM" selection, and click on it.
r In the expanding box below, select the distance from Destination at which
you wish the Alarm to be engaged. Click on that selection.
r Highlight the "ARRIVAL ALARM" field, and click on it.
r To activate the Arrival Alarm, click on the "ON" option.
r To activate the Anchor Alarm, which is active when you are not navigating to
a destination, highlight the "ANCHOR ALARM" field, and click on it.
r Select the distance of anchor drag beyond which you wish the Alarm to sound,
and click on it.
r Highlight "EXIT" and click on it.
The Alarm consists of a written message, as well as a "Beep" if the Beeper is
turned on. See the next section.
Is engaged when your position changes while you
are at anchor.
Beeps when a "fix" on your position is achieved.