Setting The Map Datum; Setting The Location Format - Standard Horizon MAGNUM NAV-40 Owner's Manual

Advanced Operation
S M D
ETTING THE AP ATUM
S L
ETTING THE OCATION
F
ORMAT
74
S M D
ETTING THE AP ATUM
While most operations will utilize the default "WGS 84" database of locations,
you may have a map or a chart that uses a different database. A number of com-
monly-used databases are loaded onto your MAGNUM, and you may easily choose
one of them:
r Press the [ MENU ] key, then highlight the "SETUP" selection; click on this
selection.
r Highlight the "GENERAL" selection, and click on it.
r Highlight the "MAP DATUM" field, and click on it.
r Highlight the MAP DATUM selection you wish to use, and click on it.
r Highlight the "EXIT" and click on it.
S L
ETTING THE OCATION
While the default map coordinates (degrees, minutes, seconds) will be useful for
most applications, there are other location formats used in some situations. The
MAGNUM can be configured to handle any of these.
r Press the [ MENU ] key, then highlight the "SETUP" selection; click on this
selection.
r Highlight the "MAP SETUP" selection, and click on it.
r Highlight the "LOCATION FORMAT" selection, and click on it.
r In the expanding box at the bottom, select from the available choices:
"hddd.mm.mmm," "UTM UPS," "LORAN TD," or "BRITISH GRID." Click
on your desired format.
r Highlight the "EXIT" and click on it.
F
ORMAT