Printer Components: Front Cover To Usb Port - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Printer Components: Front Cover to USB Port

Components Description
Front Cover Opens to allow access to the Ribbon Cartridge. (Note: This cover must
be closed in order for the Printer to begin printing.)
Printhead The component of the Printer that actually does the printing. (Note:
This component is fragile and must not be bumped or touched with
anything other than a cleaning swab.)
Cancel button The Cancel button
serves to cancel the current print job and reset the Printer for the next
print job.)
If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON.
Pause button The Pause button is used to pause the Printer during normal operation
and also to resume operation after an error condition is cleared. (Note:
In general, as the icon above this button indicates, errors are related to
either the Ribbon or the cards. If an error occurs, the Pause LED will
flash.)
Card Automatically cleans cards for higher print quality.
Cleaning
Roller
Card Input Load blank cards into this Hopper.
Hopper
Power Port Connect to the included power cord.
USB Port Connect to a Windows PC with a USB cable.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
turns the Printer ON and OFF. (Note: It also
Fargo Electronics, Inc.
2-6