Fargo DTC400e User Manual page 172

RESTRICTED USE ONLY
Reviewing Frequently-asked Questions (continued)
Question
What if I lose the password
for my Printer or it is not
accepted?
What should I do if the IP
address of my Printer is
being changed by my
network?
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
See Reviewing the Dip
will be restored to the Printer if power is applied to the
Printer with Dipswitch 1 in the ON position and Dipswitch 2
in the OFF position.
(Note: This will reset all Print Server settings, which
includes static network settings, user configurations and
user passwords.)
Follow this procedure:
1. Contact your network administrator. Ask that your
current IP address be reserved or ask that they
provide a specific IP address that you can use to
configure the Ethernet interface.
OR
2. Choose an IP address that you know will not be used
by any other PC, server or network device. Use those
settings to configure your Printer with static network
settings.
(Caution: Do not do this unless you know that these
settings will always be available.)
Fargo Electronics, Inc.
Answer
Switches. Factory default settings
5-64