Fargo DTC400e User Manual page 339

RESTRICTED USE ONLY
Glossary of Terms (continued)
Term
Thermocouple
Through-hole
Timeout
TOF (Top of Form)
Track
Troubleshooting
TrueType (TT)
UltraCard
UltraCard III
Update
UPS (Un-interruptible
Power Supply)
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Definition
A device for measuring temperature using a junction of two wires
of dissimilar metals that produce a voltage when heated that
varies proportionally with the temperature.
A method of mounting circuit elements with the leads passing
through holes in the circuit board and soldered on the opposite
side.
An interruption of a print job that occurs when a function is not
completed in the time allotted by the operating system.
The leading edge of the card, as it travels through the Printer.
The area on a Magnetic stripe designated to contain the magnetic
data string.
The process of investigating and determining the cause of a
problem.
A font format that produces each character using a mathematical
equation, rather than a graphical representation, resulting in a
much sharper, cleaner image.
The Fargo brand of card stock, recommended for use in Fargo
Printers, with the necessary glossy surface and composed of
PVC.
The Fargo brand of card stock, recommended for use in Fargo
Printers that laminate, with the necessary glossy surface and
composed of PVC and PET to prevent heat distortion.
The process of installing a new revision of software or firmware to
implement new changes to the Printer's command codes and
procedures.
An AC power supply, typically powered by batteries, which
provides temporary power to the PC or Printer during an
interruption of the supply voltage.
Fargo Electronics, Inc.
Continued on the next page
11-19