Selecting The Verimark Radio Button (Frontside Option Only) - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Selecting the VeriMark radio button (Frontside option only)

Step Procedure
1 Click either VeriMark or HoloMark as shown below. The foil options are used to
control the size of the exclusion area. (Note: When VeriMark is selected a
rectangle-sized area is excluded, HoloMark uses a square sized area.)
2 Click VeriMark (below) for the rectangle-sized area.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Fargo Electronics, Inc.
6-89