Resolving A Ribbon Out Error - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Resolving a Ribbon Out Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
NOTE: Using the printer in direct sunlight may adversely affect the ribbon sensor integrity.
Step Procedure
1 Review the following information.
•
Symptom: Printer will not print.
•
Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark
•
Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon Cartridge
a. Press on the Resume button.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Fargo Electronics, Inc.
4-21