Table of Contents
Advertisement
RESTRICTED USE ONLY
Printer Components: Front Cover to USB Port
Components
Description
Front Cover
Opens to allow access to the Ribbon Cartridge. (Note: This Cover must
be closed in order for the Printer to begin printing.)
Printhead
The component of the Printer that actually does the printing. (Note: This
component is fragile and must not be bumped or touched with anything
other than a cleaning swab.)
Cancel button The Cancel button
serves to cancel the current print job and reset the Printer for the next
print job.)
If a card is left within the Printer after a print job is canceled, it will
automatically be ejected when the Printer is turned back ON.
Pause button
The Pause button is used to pause the Printer during normal operation
and also to resume operation after an error condition is cleared. (Note:
In general, as the icon above this button indicates, errors are related to
either the Ribbon or the cards. If an error occurs, the Pause LED will
flash.)
Card
Automatically cleans cards for higher print quality. (Note: Clean the
Cleaning
Card Cleaning Roller as needed.)
Roller
Card Input
Load blank cards into this Hopper.
Hopper
Power Port
Connect to the included power cord.
USB Port
Connect to a Windows PC with a USB cable.
Persona M30 Card Printer User Guide (Rev. 1.0)
turns the Printer ON and OFF. (Note: It also
Fargo Electronics, Inc.
2-6
Advertisement
Table of Contents
