Printer Components: Dye-Sublimation Print Ribbons - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Printer Components: Dye-Sublimation Print Ribbons

Note that the Printer requires both specialized and authorized print Ribbons in order to print
and function properly.
Step Procedure
1 Do not run the cards with a contaminated, dull or uneven surface through the
Printer.
Caution: Printing onto such cards will ultimately lead to poor print
quality and will greatly reduce the life of the Printhead.
2 Always store the card stock in its original packaging or in a clean, dust-free
container.
3 Do not print onto cards that have been dropped or soiled. (Note: Printhead
damage caused by contaminated or poor quality cards will automatically void the
Printhead's factory warranty.)
4 If printing onto cards with a pre-punched slot, do not print over the area of the
card with the punched slot. (Note: To avoid this area when printing, use the
options in the Overlay / Print Area tab to omit printing in this area or punch the
slot after the card has printed.)
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Fargo Electronics, Inc.
2-9