Fargo DTC400e User Manual page 173

RESTRICTED USE ONLY
Reviewing Frequently-asked Questions (continued)
Question
How can I verify/change
what IP address my
installed Printer Driver is
expecting to find my
Printer?
How do I configure my
Printer's IP settings?
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Follow this procedure.
1. Open the Printer Driver properties window.
2. Select Start -> Settings -> Printers and Faxes -> [your
Printer Driver] -> Properties.
3. From the Ports tab, select Configure Port. (Note:
The Host name will indicate IP address of the
connected Printer. If this does not match your Printer's
IP address, you can change it from this window.)
4. Enter the correct IP address.
5. Select OK.
6. Select Apply.
7. Select Close.
8. Specify the new IP address.
9. Select: Next, Next, Finish and Close.
10. Select Apply.
11. Select Close.
By default, the Printer is configured for dynamic IP
address assignment. That is, it will try to get its IP address
and other settings from your network. If it is given valid
network settings, it will use them.
OR
You can choose to configure the Printer, using a static IP
address and network settings. (Note: This can be entered
using the Network web page of the Printer or the Fargo IP
Tracer program.)
See Configuring the Network
Fargo Electronics, Inc.
Answer
Settings.
5-65