Using The Character Size Buttons - Fargo DTC400e User Manual

RESTRICTED USE ONLY

Using the Character Size buttons

Use this option to customize the Character Data Size (Bits per Character) used to encode
the magnetic data on the currently selected track. (Note: This character size includes the
parity bit (if enabled).)
Step Procedure
1 Select 5 Bits to change the bits per character to 5 BPC. (Note: This is the
default for Tracks 2 and 3).
OR
Select 7 Bits to change the bits per character to 7 BPC. (Note: This is the
default for Track 1).
OR
Select 8 Bits to change the bits per character to 8 BPC.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
Fargo Electronics, Inc.
6-61