Figure 4 - Tc12 Instation Pc Installation Screen (7.4); Figure 5 - Tc12 Instation Pc Installation Screen (8.3 & Later) - Siemens TC12 Installation, Commissioning And Maintenance Handbook

The software installation procedure is as follows:
The PC should be plugged directly into the mains, and not via the mains
distribution panel on the Instation, since the Instation has not undergone on-site
safety tests, described in the commissioning section, at this stage.

Figure 4 - TC12 Instation PC Installation Screen (7.4)

Ethernet Card
EtherLink II (3c503)
DEPCA
DEC Etherworks LC
DEC Etherworks Turbo
Digital I/O boards
Board #1 OK
Board #2 Not Installed
Figure 5 - TC12 Instation PC Installation Screen (8.3 & later)
666/HE/43100/000
TC12 Installation, Commissioning & Maintenance Handbook
SAFETY NOTE
TC 12 INSTATION PC INSTALLATION
Number of boards
1
IMD-DS1, SW1-8 Settings
Use address 0 x E0000
1 2 3 4 5 6 7
Use the cursor keys ↑ or ↓ to move between selections on menu
Use the cursor keys → or ← to move between menus
Use Enter or Return ↵ to select
Press Esc to exit
Page 19
Start Installation
No
Yes
Quit Installation
IMD boards
Board #1 OK
Board #2 Not Installed
Board #2 Not Installed
Board #2 Not Installed
8 . . .
Issue 10